Renkler quality laboratory is capable of performing measurement-quality control processes elaborately and with precision thanks to its experienced, expert staff and up-to-date technological equipment that empowers it.
A testing device used to precisely measure the micro and macro hardness values of materials.
Used for preparing samples before testing by mounting them in bakelite and improving surface quality. Grinding and polishing processes ensure a surface suitable for accurate measurement.
Used to cut materials to the desired dimensions and smooth their surfaces. It provides fast and controlled processing during the sample preparation stage.
An analytical device used to examine and evaluate weld penetration according to the ISO 5817 standard and customer requirements. It enables the detection of surface cracks, porosity, and structural defects.
Preferred for measuring the hardness of materials with large and heterogeneous structures. It provides reliable and standard-compliant results on wide surfaces.
A measuring device used to determine and control the torque applied to components. It plays a critical role in ensuring quality and reliability in production processes.
We have 2 CMM devices that can perform measurement through the program automatically, through which we can perform geometric measurement checks. Measurements can be made on pieces with a maximum size of 1200* 3000* 1000 mm.
By using scanning technology, 2D measurements can be made on laser production parts.
It is used for the measurement of radii and angles on part surfaces. Deformations occurring on the material form can be detected. Various measurements and calculations can be made with software support.
It is used in two dimensional height measurements. Dimensional calculations, diameter measurements and distance measurements can be made with the software integrated into the measuring device.
After machining, surface roughness control is performed depending on customer requests. In addition, control is performed on received raw materials as required by the standards.
Rockwell, Vickers and Brinell hardness tests can be made with technological devices. In addition to these equipment, the sampling, bakelite taking, sanding and polishing operations required for measurement can also be carried out at Renkler.
Tensile and compression tests are performed on spring materials in line with customer expectations. Our equipment can apply up to 500 kg of compression force and up to 50 kg of tensile force.
It is a device with which we can measure the thickness of coatings applied to ferrous and non-ferrous metals. Thickness measurements of silver, tin, nickel, chrome plating are made with suitable solutions.
It enables measurement by magnifying small-sized pieces placed on it at various rates thanks to a strong light emitted towards the object from the bottom.
The measurement of the coating and paint thickness of all parts whose surface treatment have been completed can be made without damaging the product.
